AVM 58/220
Branch and connecting cable joints especially for street lighting.
Two-piece, halogen-free sleeve shells made of transparent and impact-resistant polycarbonate in a slim and symmetric form (smaller amount of casting resin) suitable as a branch or connection cable joint. The branch cable is placed parallel to the main cable. Easy assembly thanks to hinge technology and pre-punched foam seals with break-out rings that can be glued in place if required and can be adjusted to the cable diameter without tools. The cable joint is protected electrically and mechanically by casting with ecologically optimized casting compound ISO-PUR® K2000, thin casting compound ISO-PUR® K762, label-free casting compound ISO-CAST® BRH or training-free casting compound ISO-PUR® K2000H.
Area of application
Depending on their size, the branching and connecting cable joints of the AVM type can be used to supply street lamps, traffic signs, advertising surfaces, signaling systems or to repair electrical devices on plastic cables.
Technical data
Tests
- DIN VDE 0278 part 3
- DIN VDE 0291 draft 6 / 97
- DIN VDE 0291 part 2
- DIN EN 50393 (VDE 0278-393)
- DIN EN 50655-1:2018-06
- E DIN EN 60455-3-8:2018-02
- prHD 631.1
- European standard HD 623S / 1.97
- KEMA - tested (10 m water pillar)
- Additional high current (short circuit) test (VEW - PA 003)
- Control of each batch acc. DIN / ISO 9001
Assembly
Branch and main cables are connected with common available compression connectors or cable clamps. The fully assembled cable joint is poured with cast resin through the large filling opening and closed with sliding covers. Fast filling of the cable ditch is possible due to the rapid hardening of the casting compound.
Delivery
Sleeve shells, seals, sliding covers, auxiliary material, cast resin, assembly instructions. On request, cast resin in two-chamber bags (standard) or can packaging.
Accessories (on request)
Cable clamps, compression connectors, solderless grounding set.
Dimensions of cable cases and examples of suitable cable/joint combinations
Length
220 mm
Max. diameter
58 mm
Volume
465 ml
Max. diameter main / branch cable
22 / 21 mm
Suitable cable types
Main or connection cable dimensions (mm2)
N(A)YY 4 x 1,5 to 4 x 10
NA2XY 4 x 1,5 to 4 x 10
N(A)YCWY 3 x 4/4 to 3 x 10/10
Branch cable dimensions (mm2)
N(A)YY 4 x 1,5 to 4 x 10
NA2XY 4 x 1,5 to 4 x 10
N(A)YCWY 3 x 1,5/1,5 to 3 x 10/10
