AV 185 ZE
Branch joint with a thick-walled housing and strain relief clamps particularly suitable for hot cast
Two-piece, very stable, screwed sleeve shells with a special shape to accommodate a clamping ring. The seal is made with foam seals with break-out rings, which can be adjusted to the cable diameter without tools. The cable joint is protected electrically and mechanically by casting with ecologically optimized casting compound ISO-PUR® K2000, thin casting compound ISO-PUR® K762, label-free casting compound ISO-CAST® BRH or training-free casting compound ISO-PUR® K2000H. However, the cable joint can also be cast with removable masses (ISO-RC® SZ mass, hot casting mass, ISO-PUR® K715).
Area of application
The AV type branch cable joint can be used universally on plastic cables using compact clamping rings. It is particularly suitable for cables subject to high mechanical stress.
Technical data
Tests
- DIN VDE 0278 part 3
- DIN VDE 0291 draft 6 / 97
- DIN VDE 0291 part 2
- DIN EN 50393 (VDE 0278-393)
- DIN EN 50655-1:2018-06
- E DIN EN 60455-3-8:2018-02
- prHD 631.1
- European standard HD 623S / 1.97
- KEMA - tested (10 m water pillar)
- Additional high current (short circuit) test (VEW - PA 003)
- Control of each batch acc. DIN / ISO 9001
Assembly
Branch and main cables are connected with common compact clamp rings. With these rings, it is not necessary to remove the core insulation. Then the foam seals are adjusted to the cable diameter and the strain relief clamps are fitted. The screwed cable joint is then poured with cast resin over the large filling opening and closed with a cover. Fast filling of the cable ditch is possible due to the rapid hardening of the casting compound and the high mechanical stability of the cable case.
Delivery
Sleeve shells, seals, cover, auxiliary material, cast resin, assembly instructions. On request, cast resin in two-chamber bags, cans, or hardener in reusable bottles.
Accessories (on request)
Compact clamping rings, cable clamps, compression connectors, solderless grounding set.
Dimensions of cable cases and examples of suitable cable/joint combinations
Length
410 mm
Max. diameter
140 mm
Volume
4000 ml
Max. diameter main / branch cable
60 / 45 mm
Suitable cable types
Main or connection cable dimensions (mm2)
N(A)YY 4 x 16 to 4 x 185
NA2XY 4 x 16 to 4 x 185
N(A)YCWY 3 x 35/35 to 3 x 185/185
Branch cable dimensions (mm2)
N(A)YY 4 x 16 to 4 x 120
NA2XY 4 x 16 to 4 x 120
N(A)YCWY 3 x 35/35 to 3 x 95/95