AVM125/610
Branch and connecting cable joint, especially as a transition cable joint.
Cable joint AVM125/610
Two-piece, halogen-free sleeve shells made of transparent and impact-resistant polycarbonate in a slim and symmetric form suitable as a branch or connection cable joint. The branch cable is placed parallel to the main cable. Easy assembly thanks to hinge technology and pre-punched foam seals with break-out rings that can be glued in place if required and can be adjusted to the cable diameter without tools. The cable joint is protected electrically and mechanically by casting with ecologically optimized casting compound ISO-PUR® K2000, thin casting compound ISO-PUR® K762, label-free casting compound ISO-CAST® BRH or training-free casting compound ISO-PUR® K2000H.
Area of application
Depending on their size, the branch and connection cable joints of type AVM can be used as transition cable joints from ground to plastic cables, as connection cable joints on paper or plastic cables, as repair cable joints, as double branch cable joints (double house connection) or for telecommunications applications.
Technical data
Tests
- DIN VDE 0278 part 3
- DIN VDE 0291 draft 6 / 97
- DIN VDE 0291 part 2
- DIN EN 50393 (VDE 0278-393)
- DIN EN 50655-1:2018-06
- E DIN EN 60455-3-8:2018-02
- prHD 631.1
- European standard HD 623S / 1.97
- KEMA – tested (10 m water pillar)
- Additional high current (short circuit) test (VEW – PA 003)
- Control of each batch acc. DIN / ISO 9001
Assembly
Branch and main cables are connected with common compression connectors or cable clamps. Due to their size, the versions AVM 125 / 610 and AVM 160 / 500 are also suitable for the use of compact clamping rings. The fully assembled cable joint is poured with cast resin through the large filling opening and closed with sliding covers. Fast filling of the cable ditch is possible due to the quick hardening of the casting compound.
Delivery
Sleeve shells, seals, wide sliding covers, auxiliary materials, cast resin, assembly instructions. On request, cast resin in cans or two-chamber bags.
Accessories (on request)
Compact clamping rings, cable clamps, compression connectors, solderless grounding set.
Dimensions of cable cases and examples of suitable cable/joint combinations
Length
610 mm
Max. diameter
125 mm
Volume
6450 ml
Max. diameter main / branch cable
58 / 35 mm
Suitable cable types
Main or connection cable dimensions (mm2)
N(A)YY 4 x 120 bis 4 x 185
NA2XY 4 x 120 bis 4 x 185
N(A)YCWY 3 x 95/95 bis 3 x 185/185
N(A)KBA 4 x 95 bis 4 x 185
N(A)KLEY 3 x 95 bis 3 x 240
Branch cable dimensions (mm2)
N(A)YY 4 x 25 bis 4 x 70
NA2XY 4 x 25 bis 4 x 70
N(A)YCWY 3 x 35/35 bis 3 x 70/70
N(A)KBA 4 x 25 bis 4 x 70
N(A)KLEY 4 x 25 bis 4 x 70