ISO-RC® Cold Cleaner HP03-33
Solvent-based special cleaner & swelling agent
Canister with ISO-RC® Cold cleaner HP03-33
ISO-RC® Cold Cleaner HP03-33 is a solvent-based special cleaner for swelling and dissolving polyurethane adhesions on components as well as mixing and dosing systems on which polyester and polyether polyols are processed in combination with MDI, TDI, HDI and IPDI. The product is RoHS compliant according to EU Directives 2011/65/EU (“RoHS”) and 2015/863/EU (“RoHS III”).
Technical data
Downloads
Colour
Clear, slightly yellowish
Viscosity (20°C; rot.; 1 s-1)
< 200 mPas
Flash point
Approx. 56°C
Density (23oC)
Approx. 0,94 g/cm3
Boiling range
158 – 194°C
Storage and transport
Store in a dry and airtight, closed container at 10 – 35°C. Can be stored for at least 24 months in original sealed containers under the above conditions. Short-term deviations during trans-port and storage are acceptable.
Cleaning
To clean or remove the cured polyurethane layer by layer, place the parts in the cold cleaner and, after they have swelled, clean them mechanically or wipe off any residue. Repeat this procedure if necessary.
For subsequent cleaning, we recommend ISO-RC® Cold Cleaner HP90-1.
Processing
During processing, make sure to wear full safety clothing – especially safety glasses and chemical-resistant rubber gloves – and ensure good ventilation. The cleaner and any liquids contaminated with it must not enter the groundwater.
The EC safety data sheet provides information on safety-relevant product properties.